Quantum SDLC 2.7, Руководство по установке

Страница: 112 / 152

106 Upgrade, Remove, Repair
Step 4 Execute and OK to successful completion and Exit the DB Tool.
Step 5 Go to temp location and zip the newly created file.
Step 6 Copy and paste zipped file either onto floppy disk or folder on RAID disk or network resource.
Save to archive file
Step 1 On active node right click the penguins in the toolbar. Select Tools > Scalar DLC DB tool, then
OK .
Step 2 Select Save tab and “...” in the Destination area.
Step 3 Specify a destination location (both local and network resources are allowed). Enter file name
and select
Save .
Step 4 Save and OK to successful completion and Exit the DB Tool.
The zipped database file is stored on the location specified. Move or copy it anywhere if required.
Restore Scalar DLC Database
Step 1 Copy and paste archive file from either floppy disk or folder on RAID disk or network resource
to the temp location (both local and network resources are allowed, using “C:\temp“ is
preferable).
Step 2 On the active node right click the penguins in the toolbar. Take Offline (or Stop) Scalar DLC and
OK.
Step 3 Right click the penguins in the toolbar. Select Tools > Scalar DLC DB tool .
Step 4 Select Restore tab and select From Device .
Step 5 Select “...” in Device Name section. Select the <temp location> \ <database file> to use and
Open .
Step 6 Set the Move to physical file names to “R:\Program Files\...” (if not set by default).
Step 7 Select Restore and Restore and OK and Exit .
Step 8 Right click the penguins in the toolbar. Bring Online (or Start) Scalar DLC and OK.
Updating Drivers
The following drivers may require an update during installing or upgrading the Scalar DLC and/or installing
the new hardware.
Note
If the backup is performed from the previous version of Scalar DLC, follow the Recover
database from old backup on page 112.