Quantum SDLC 2.7, Руководство по установке

Страница: 35 / 152

Installation Guide 29
• Set “Volume Label” to “RAID”
• Select “Perform A Quick Format” (see Figure 13 )
Figure 11 Format RAID Partition
• Press “Next” and “Finish” and let format complete.
• Shutdown Node1, turn RAID off.
Step 4 Power up Node2 and log in as Administrator for SDLC2 (this computer). Turn RAID on and wait
for it to come ready.
Step 5 Join RAID disk
• Right click “My Computer” and select “Manage”.
• Select Device Manager and open Disk Drives. Scan for new devices.
• Verify that the ADTX RAID is present.
• Select “Disk Management”. Right click “RAID”. Select “Change Drive Letter and Path”.
• Select “Edit” and “Assign Drive Letter” to “R”. Press OK. Press “Yes” to confirm.
• Shutdown Node2.
Configuring Cluster Service
Under WIndows 2000 and Windows 2003 the cluster is installed differently.
Windows 2000
Step 1 Power up Node1 and log in as Administrator to SDLC1 (this computer)
Step 2 Configure Cluster Service on Node1.
• Select Start > Settings > Control panel > Add/Remove Programs > Add/Remove Windows
Components >> Cluster Service . Press Next .