Quantum SDLC 2.7, Руководство по установке

Страница: 36 / 152

30 Setting Up the Scalar DLC
• Insert Windows 2000 Advanced Server SP4 CD and press OK. Cluster Service Configuration
Wizard will start. Press “Next”.
• Click “I Understand” and “Next”.
• Select “The First Node in the Cluster” and “Next”.
• Set cluster name to SDLC-CLUSTER and “Next”.
• Set User Name to “adicuser” and Password to “pa$$w0rd”. Set Domain to <domain> and
“Next”.
• Click “Yes” to adding account to the Administrators Group.
• Ensure that “R: Raid” is in managed disks and “Next”.
• Select “R: Raid” and “Next” and “Next”.
• Set up Cluster Network
• For Network Name “Public” select “Enable this Network for Cluster Use”.
• Select “All Communications (mixed network)” and “Next”.
• For Network Name “Private” select “Enable this network for cluster use”.
• Select “Internal Cluster Communications Only (Private Network)” and “Next”.
• Ensure that “Private” is at the top of Networks list and “Next”
♥
Set “Cluster IP address” to <ip address> (208.230.5.3 in lab)
♥
Set “Subnet Mask” to 255.255.255.0
♥
Set “Network” to “Public” and “Next”.
• “Finish” and “OK” to Cluster Service Started Successfully.
• Finish and eject CD and close all windows.
Step 3 Power up Node2 and log in as Administrator for SDLC2 (this computer)
Step 4 Configure Cluster Service on Node2.
• Select Start > Settings > Control panel > Add/Remove Programs > Add/Remove Windows
Components >> Cluster Service . Press Next .
• Insert Windows 2000 Advanced Server SP4 CD and press OK.
• Cluster Service Configuration Wizard will start and Next
• Click “I Understand” and “Next”.
• Select “Second or Next Node in the Cluster” and “Next”.
• Set cluster name as SDLC-CLUSTER
• Select “Connect to Cluster As”.
• Set User Name to “adicuser” and Password to “pa$$w0rd”.
• Set Domain to <domain> and “Next”.
• Set password as “pa$$w0rd” and “Next”.
• “Yes” to Specified Account not a Member
CAUTION
The cluster name must not be longer than 14 symbols.