PT113
Instruction Manual
4
Full scale output. Errors may be presented as a % of the full output range after calibration.
PLU
Product Look Up. A code to look up values stored in product information
CLU
Counting Look Up. A code to look up values stored for counting
APW
Average product weight. Used in parts counting, this is the average weight of one piece of product,
determined by weighing a sample and dividing by the number of parts.
ALU
Amount Look Up. A code to look up values stored in memory in relation to the amounts (quantity) of
parts in check weighing.
Span Adjustment
Adjust the indicator so that when the load on the scale is changed the scale correctly shows the same
change.
EtherX
EtherX is third party software available from the internet to enable setting of IP address parameters in
the indicators with Ethernet.
AzCom
AzCom is software for communication and configuration of the PT Azure Series indicators and
controllers. AzComT is software for Transmitters. AzcomI is for indicators and displays.
