PT113
Instruction Manual
26
6.3.4.2 PT113PB
The Gateway tab in AzComT is used only for setting a Profibus rack address between 1 and 126.
Default is '01'.
6.3.4.3 PT113PN
To configure the Ethernet port ensure that the PT113PN is connected on the same network as the PC
with AzComT and click on “Find on LAN”. The following window opens.
If you have multiple devices on the Ethernet network they will be listed. Each device has it's MAC
address on the label, locate the MAC address listed in the software from the information on the label of
the device you are configuring and double click on it to open the window below.
Make the necessary settings here to suit your network and click “Save Settings” to save.
Parameter
Description
Host Name
: Device name of the instrument.
Default is ‘ ’.
IP Address
:
Set the IP address manually to suit your network.
Default is ‘192.168.16.250’.
Alternatively tick DHCP to have the IP address automatically set.
Gateway
:
Network point that acts as an entrance to another network or internet.
Default is ‘192.168.16.254’.
If DHCP is selected, the gateway address should be automatically set.
Subnet Mask
:
Describes IP address range that can be used in the network subnet.
Default is ‘255.255.255.0’.
If DHCP is selected, the subnet mask should be automatically set.
Primary DNS
:
Obtain primary DNS manually.
Default is ‘208.67.222.222’.
If DHCP is selected, the DNS address should be automatically set.
