PT113
Instruction Manual
1
1 NOTICES
1.1 SAFETY
CAUTION!
READ THIS MANUAL BEFORE OPERATING OR SERVICING THIS EQUIPMENT.
FOLLOW THESE INSTRUCTIONS CAREFULLY. SAVE THIS MANUAL FOR FUTURE
REFERENCE. DO NOT ALLOW UNTRAINED PERSONNEL TO OPERATE, CLEAN,
INSPECT, MAINTAIN, SERVICE, OR TAMPER WITH THIS EQUIPMENT. ALWAYS
DISCONNECT THIS EQUIPMENT FROM THE POWER SOURCE BEFORE CLEANING OR
PERFORMING MAINTENANCE. CALL PT LIMITED FOR PARTS, INFORMATION, AND
SERVICE.
WARNING!
ONLY PERMIT QUALIFIED PERSONNEL TO SERVICE THIS EQUIPMENT.
EXERCISE CARE WHEN MAKING CHECKS, TESTS AND ADJUSTMENTS THAT MUST BE
MADE WITH POWER ON. FAILING TO OBSERVE THESE PRECAUTIONS CAN RESULT IN
BODILY HARM.
WARNING!
FOR CONTINUED PROTECTION AGAINST SHOCK HAZARD CONNECT TO A
PROPERLY GROUNDED OUTLET ONLY. DO NOT REMOVE THE GROUND PIN.
WARNING!
DISCONNECT ALL POWER TO THIS UNIT BEFORE REMOVING ANY
CONNECTION, OPENING THE ENCLOSURE OR SERVICING.
WARNING!
BEFORE CONNECTING/DISCONNECTING ANY INTERNAL ELECTRONIC
COMPONENTS OR INTERCONNECTING WIRING BETWEEN ELECTRONIC EQUIPMENT
ALWAYS REMOVE POWER AND WAIT AT LEAST THIRTY (30) SECONDS BEFORE ANY
CONNECTIONS OR DISCONNECTIONS ARE MADE. FAILURE TO OBSERVE THESE
PRECAUTIONS COULD RESULT IN DAMAGE TO OR DESTRUCTION OF THE EQUIPMENT
OR BODILY HARM.
CAUTION!
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE
DEVICES.
1.2 PRECAUTIONS
•
Before using the instrument, check that the supply voltage is correct. If it is not, do not connect the scale to the
power supply.
•
Before energising the instrument, check all connectors are installed properly and all external cables are
installed safely to avoid mechanical damage.
•
The scale should only be used under suitable environmental conditions as indicated in this manual.
•
Do not use this scale in places where conditions are unstable or there is explosive danger.
•
Do not place the scale near heat sources or under direct sunlight where it may heat up.
•
Keep the scale as far away from other electromagnetic radiation sources as possible, their influence could
affect the weighing accuracy.
Failure to follow these precautions will void warranty, contact your supplier to clarify any questions.
Rights and Liabilities
This publication may be reproduced in part, stored in a retrieval system, or transmitted in any form or by any means,
mechanical, photocopying, recording, or otherwise, without the prior written permission of PT Limited.
No patent liability is assumed with respect to the use of the information contained herein. While every precaution has
been taken in the preparation of this manual, PT assumes no responsibility for errors or omissions. Neither is any
liability assumed for damages resulting from the use of the information contained herein.
The information herein is believed to be both accurate and reliable. PT, however, would be obliged to be informed if any
errors occur. PT cannot accept any liability for direct or indirect damages resulting from the use of this manual.
PT reserves the right to revise this manual and alter its content without notification at any time.
Neither PT nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or
expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with PT operating and
maintenance instructions.
PT shall not be liable against any damages or problems arising from the use of any options or any consumable products
in any way other than in accordance with their standard terms and conditions.
NOTE: The contents of this manual are subject to change without notice.
All rights reserved. Copyright © 2015 by PT Limited, Auckland, New Zealand
