Proxim Stratum, Руководство по установке и обслуживанию

Страница: 65 / 89

Stratum Installation and Maintenance Guide Chapter 3: Maintaining the Stratum
••••
57
------- Web Browser/HTML ------
To see reports on the Web browser, click Status Reports and then choose one of the report types listed in the sub-
menu. The RF Link Status report is shown in the partial screen shot below. The local Stratum will report a “?” if it
cannot communicate with the remote unit.
Checking that Packets Are Going Over the Wireless Link
From the reports available, select RF Link Status.
When packets are being transmitted, the Tx Packet Count and the Rx Packet Count fields will increase as data is
transmitted across the wireless link. To verify that these counts are increasing, wait for a few seconds and then press
Ctrl-U (VT-100) or click the Update button (HTML) to update the counters.
Within the VT-100 session, choosing RF Pkt Interval will display a screen that shows packet intervals. Choosing
RF Error Interval from the list of reports will display a screen that shows error intervals.
Within the HTML session, you may display reports on RF and LAN traffic broken down into 15-minute intervals by
choosing Interval Reports from the menu on the left-hand side of the browser screen.