PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 58 / 120

58
Operation
Sweeping
• Press the "Button for
switching the pre-
sweep/vacuum unit
on/off" (Fig.
22/4) on the
right-hand operating
panel.
Various functions can be switched on or
off with the following buttons:
• Switch extractor fan on/off
(Fig. 22/3)
If the ground is wet, always
switch the vacuum fan off!
• Actuate the agitating device
(Fig. 22/2)
Once a day with normal use.
Sweeping, wet scrubbing and
vacuuming dry
This program is the standard cleaning
program.
• Press the "Button to
switch the pre-
sweep/vacuum unit,
scrubbing unit and
vacuum on
simultaneously"
(Fig.
21/16) on the left-hand
operating panel.
Various functions can be switched on or
off with the following buttons according
to the conditions at the location of use:
Fig. 26
• Increase brush pressure (Fig. 26/1)
• Fresh water feed on/off (Fig. 26/3)
• Reduce fresh water quantity
(Fig. 26/2)
• Increase fresh water quantity
(Fig. 26/4)
Wet scrubbing and vacuuming dry
This program is a standard cleaning
program for this vehicle.
• Press the "Button to
switch the scrubbing unit
and vacuum on
simultaneously"
(Fig.
22/11) on the left-
hand operating panel.
Various functions can be switched on or
off with the following buttons according
to the conditions at the location of use:
• Increase brush pressure (Fig. 26/1)
• Fresh water supply on/off (Fig. 26/3)
• Reduce fresh water quantity
(Fig. 26/2)
• Increase fresh water quantity
(Fig. 26/4)
2 3 4 1