![background image](http://html.mh-extra.com/html/graco/therm-o-flow-t7-series/therm-o-flow-t7-series_instructions-manual_2251693001.webp)
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2004, Graco Inc. is registered to I.S. EN ISO 9001
309832D
Instructions
THERM-O-FLOW
®
Hot Melt Tank T7
For melting and pumping non-explosive hot melt thermoplastic
adhesives. Not recommended for water-based curable or
solvent-based adhesive.
Model 234251
115 VAC
Model 234252
230 VAC
300 psi (2.0 MPa, 20.6 bar) Maximum Working Pressure
Important Safety Instructions.
Read all warnings and instructions in this
manual. Save these instructions.
See page 2 for table of contents.
Содержание THERM-O-FLOW T7 Series
Страница 36: ...Parts 36 309832D Parts Housing assembly 1 2 3 4 5 7 6 8 ti5398a 8 10 9 13 12 11 14 15 16 17 ...
Страница 41: ...Parts 309832D 41 ...
Страница 46: ...Schematics 46 309832D Base wiring ...
Страница 49: ...Technical Data 309832D 49 ...