Operation
16
309832D
Selecting hoses and applicators
Setting tank, hose, and applicator temperature
Setting pump control and speed
1.
Use the loop select up/down
to scroll through
and select each device
.
2.
Press the loop select on/off
ON. The LED to
the right of the selected device should flash
GREEN when ready and flash AMBER when heat-
ing.
Once device is selected, press the set temperature
increment or decrement
to set appropriate actual
temperature within selected range. See
The pump will not operate until the tank is within
90% of set temperature. The tank is at temperature
when all device LEDs are flashing GREEN.
1.
Press the pump on/off
ON.
2.
To set the pump to cycle, crawl, or run, press the
pump function toggle
. For pump function
description, see
chart on page
8. The LEDs will show RED when tank is not ready
or pump control is off. The LEDs will show GREEN
when ready.
3.
Adjust pump speed by pressing the pump speed
increment/decrement
. The pump speed indica-
tor will illuminate showing current speed level.
If pump is in crawl setting, pump speed is not
adjustable.
Содержание THERM-O-FLOW T7 Series
Страница 36: ...Parts 36 309832D Parts Housing assembly 1 2 3 4 5 7 6 8 ti5398a 8 10 9 13 12 11 14 15 16 17 ...
Страница 41: ...Parts 309832D 41 ...
Страница 46: ...Schematics 46 309832D Base wiring ...
Страница 49: ...Technical Data 309832D 49 ...