Maintenance
309832D
19
Maintenance
Daily Maintenance
Before powering up the hot melt system perform the fol-
lowing checks.
Tank Screen Inspection
A screen 118211 is located at the bottom of the tank to
prevent contaminants from damaging the pump assem-
bly. Inspect and clean screen on a regular basis. Inspect
when tank is close to or is empty of material. See
, page 14.
1.
Inspect the melt tank for foreign materials and/or
charring of the adhesive. Wipe off all excess adhe-
sives from all surfaces with purging compound
118090.
2.
Check the hoses, applicator heads, and nozzles for
wear and ensure integrity of all electrical connec-
tions.
3.
Verify the hose is being properly supported so it is
not stressed during use. The minimum bend radius
is 16 in. (40.64 cm) when hot.
4.
Look for leaks under the melt unit and at all
mechanical connections.
Содержание THERM-O-FLOW T7 Series
Страница 36: ...Parts 36 309832D Parts Housing assembly 1 2 3 4 5 7 6 8 ti5398a 8 10 9 13 12 11 14 15 16 17 ...
Страница 41: ...Parts 309832D 41 ...
Страница 46: ...Schematics 46 309832D Base wiring ...
Страница 49: ...Technical Data 309832D 49 ...