PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 27 / 120

27
Operation
3 Operation
Operating personnel must
read the operating manual
through carefully. Operating
personnel should complete
their initial test drive on a
sufficiently large piece of open
space until they are familiar
with the individual operating
elements and the respective
functions.
3.1 Method of operation
The Admiral 48D is a scrubber-drier for
wet cleaning hard floors (refer to
Fig.
14). It cleans floors by means of
intensive scrubbing with the aid of a
water and cleaning agent solution. The
squeegee at the rear of the vehicle
vacuums up the waste water into the
recovery tank in the same working
process.
By using the pre-sweep/vacuum unit,
the vehicle can also be operated
according to the tandem principle for
the advanced sweeping and dry
cleaning of hard floors: the dirt is swept
up dust-free using two side brushes and
a cylindrical brush.
Fig. 14
The scrubber-drier is a ride-on machine
designed for the economic cleaning of
large floor areas in buildings. A seat
contact ensures that the vehicle can
only be operated when an operator is
seated on the driver's seat.
The most important vehicle elements
are described below:
3.1.1 Pre-sweep/vacuum unit
(Fig. 15/4)
The pre-sweep/vacuum unit sweeps
and vacuums up dirt in dry areas in front
of the scrubbing unit without swirling up
dust. In this case, the two side brushes
sweep the dirt directly in the track of the
cylindrical brush. The side brushes
sweep up the dirt from corners and
edges so that it is not necessary to drive
too close to shelves, walls, machines,
etc. and a driving clearance to allow
steering can easily be maintained. The
cylindrical brush then sweeps the dirt
forwards into the dirt hopper. The fine
dust swirled up by the cylindrical brush
is drawn up by the extractor fan and fed
to the filter element. Only clean air is
blown from the machine. The
Admiral 48D complies with dust
category U
(BIA). The pre-sweeping
and vacuuming system and the filters
are easily accessible for maintenance
tasks.