PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 41 / 120

41
Operation
Right-hand operating panel
(Fig.
20/6)
• This operating panel contains the
key switch to switch the vehicle on
and off, the horn and a range of
switches to operate the optional
equipment, also refer to
paragraph 3.2.3.
Service brake
(Fig.
20/7)
• In order to slow the vehicle down and
bring the scrubber-drier to a stop,
tread on the foot pedal to the left of
the accelerator (as with a normal
vehicle) to actuate the hydraulic
service brake.
Accelerator to drive forwards and
backwards
(Fig.
20/8)
• The pedal on the right serves to
control the driving speed (as in a
normal vehicle).
• Before actuating the accelerator, use
the driving direction switch
(Fig.
20/5) to set the direction of
travel: forwards or reverse.
• Forwards or reverse (according to
the driving direction switch setting):
Press the accelerator forward and
down slowly.
• Release the pedal: The speed is
automatically reduced, slowly. The
vehicle rolls to a stop until reaching
its zero setting.
• To stop securely, apply the service
brake (Fig. 20/7).
• The speed for forward drive is
approx. 5.0 mph and for reverse
drive approx. 2.5 mph.
• The working speed when the
brushes are switched on, the
squeegee is lowered and pre-
sweep/vacuum unit is approx.
4.4
mph.
An acoustic warning signal
(buzzer) is issued should the
drive motor overload. At the
same time, the red alarm lamp
(Fig.
20/5) lights up in the left-
hand operating panel
(Fig.
21/2) and the driving
speed is reduced by
approx.
50%. In addition, an
error code appears in the
service indicator (Fig.
21/6).