PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 19 / 120

19
Starting Up
2.3 Prior to starting up for the
first time
The following work must be completed
before starting the vehicle up for the
first time:
2.3.1 Installing brushes and pads
The machine must have three brushes
or three pads fitted.
Before starting to use the
vehicle for the first time, ensure
that appropriate brushes or
pads have been installed.
The brush head has to be in
lifted position when changing
the brushes.
Switch off the scrubbing unit,
set the key switch to position 0
and remove the key.
Selecting brushes
The scrubber-drier must be equipped
with the brushes and pads from the
accessories program according to the
degree of soiling and characteristics of
the floor.
Refer to Section 4 for the
brushes available.
Fig. 4
At the factory, a water retaining ring
(Fig.
4/1) is fitted to the brushes which
reduces water consumption
considerably during scrubbing.
Opening and closing the deflector
Fig. 5
1 Deflector
2 Deflector lock
3 Grip
Open the deflector (Fig. 5/1) before
assembling or disassembling brushes
and pads:
1. Take hold of the deflector (Fig.
5/1)
by the grip (Fig. 5/3).
2. Raise the deflector (Fig. 5/1) and
pivot outwards to the front.
3. Lower the deflector (Fig. 5/1)
(service position).
The deflector is closed in the opposite
sequence.
1
1 2 3