PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 88 / 120

88
Maintenance and Service
5.4.2 Servicing the driving batteries
Checking the acid level
The battery acid level must be checked
by the customer on a weekly basis and
distilled water must be topped up, if
necessary; also refer to Sections 5.3.1
and 5.3.2.
There must be no naked
flames used in the vicinity
when handling batteries,
particularly when checking the
acid level.
Details on the filling process are
contained in the manual provided with
the water filling device.
Spilled battery acid must never
enter the sewage system in its
initial form, it must be
neutralized beforehand: e.g.
diluted with plenty of water or
absorbed with granulate.
Checking the acid density and
voltage of each cell
These points must be checked and
corrected at regular intervals within the
scope of PowerBoss system
maintenance by an authorized service
center.
Also refer to the information in
the supplementary sheet 88-
60-2556 "Information on
driving batteries".
5.4.3 Disassembling the battery
1. Park the vehicle on a level area of
floor.
Turn the key switch to position
0 and remove the key.
2. Open the side doors to the left and
right (Fig. 28/3).
3. When you are positioned on the
right-hand side of the vehicle, take
hold of the seat console at the
handle (Fig.
28/2) and pivot up
towards the front.
Pivot the seat console
(Fig.
28/1) open from the right-
hand side of the vehicle,
otherwise your hands could be
crushed between the seat
console and cab safety roof (if
fitted).
4. Disconnect the battery and vehicle
plug (Fig. 28/4+5).
When disassembling the
batteries, use appropriate
lifting gear.