PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 93 / 120

93
Maintenance and Service
5.5.1 Filling the fresh water tank
Fill the fresh water tank (Fig. 29/4) with
fresh water and cleaning agent before
starting with the work, also refer to
Section 3.1.5.
1. Park the machine on a level floor
area.
2. Open the tank lid (Fig. 29/2) and lock
in place.
3. Fill the fresh water tank to the
maximum mark.
Only fill water at maximally
122
°F!
4. Mix cleaning agent in accordance
with the manufacturer's instructions.
5. Close the lid (Fig. 29/2) on the fresh
water tank.
Filling the fresh water tank via the
automatic filling device
Please observe the guidelines
provided by the water supply
company. The vehicle must not
be connected directly to a
public drinking water supply to
prevent chemicals getting into
the drinking water supply. A
brief connection is permitted,
however, if a backflow
preventer with pipe aerator is
installed in the supply line. A
backflow preventer of the type
EA
3 or EA 2 must be installed.
1. Open the rear doors on the left and
right as well as the rear panel frame
(Fig.
23/7-9).
2. Connect a filling hose (Fig. 30/3)
with a connection diameter of 0.7 in
(3/4 inch).
Fig. 30
3. Open the ball cock (Fig. 30/2).
4. Press the button for the solenoid
valve (Fig. 30/1). This is located
under the suction turbine.
The button for the solenoid
valve (Fig.
30/1) can also be
actuated when the key switch
is switched off.
1
2
3