PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 98 / 120

98
Maintenance and Service
5.6.4 Cleaning the air intake filter
The filter sieve (Fig. 33/1) is located in
the recovery tank above the maximum
water level on the suction pipe. The
accumulation of dirt in the filter sieve
must be checked daily and cleaned as
necessary:
Fig. 33
1. Pull the filter sieve from the suction
pipe and clean with water.
Remove the filter sieve
completely to clean it.
During cleaning and operation,
pay attention that no water and
no particles of dirt get into the
suction pipe and into the
suction turbines.
2. Dry the filter sieve after cleaning. Do
not replace when dripping wet!
5.6.5 Cleaning the openings to the
fresh water tank
The openings between the recovery
and fresh water tank (Fig.
33/2) serve
for ventilation between the two tanks.
They must be checked regularly for
accumulations of dirt and cleaned as
necessary.
2
1