PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 31 / 120

31
Operation
The development of excessive foam
impairs the vehicle's function. It
indicates overdosage of the cleaning
agent; components of the cleaning
agent which are fed back to the waste
water cause foaming. Information on
dosage is provided on the cleaning
agent container. Use the
manufacturer's information as an initial
guideline. Practical experience will
ensure that you quickly find out which is
the right cleaning agent and the
optimum dosage to suit your needs.
The fresh water supply to the brushes is
automatically opened when the
scrubbing program is activated. If
necessary, the feed can be stopped
manually by means of the ball cock.
Operating times with one tankful:
• at 0.5 gal/min approx. 155 minutes
• at 1.1 gal/min approx. 77 minutes
• at 1.8 gal/min approx. 44 minutes 3.1.6 Recovery tank
(Fig.
16/1)
The recovery tank is located behind the
driver's seat on the left-hand side. The
recovery tank is a tank partitioned by a
membrane panel and has a volume of
approx. 81.9 gal. The waste water is fed
to the recovery tank via the squeegee
by means of a vacuum. A float switch at
the top of the recovery tank switches
the suction turbine off automatically as
soon as the maximum tank fill level is
reached. In this case, the control lamp
(Fig. 19/2) on the left operating panel
lights up. An acoustic signal is also
issued. A spray/vacuum tool (refer to
Section 4), which can be connected to
the vehicle, is optionally available with
which to clean and vacuum up water
from areas difficult to access.