PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 46 / 120

46
Operation
Button for squeegee and
suction turbine
(Fig.
21/10) This button
serves to switch the suction
turbine on and off with
simultaneous lowering and
raising of the squeegee. If the function
is active, the green control lamp lights
up.
This button must also be
pressed when working with
optional tools connected to a
suction hose. Operating
personnel must not be seated
on the driver's seat in this case
(seat contact is bypassed).
Only the suction turbine is
activated at this point, the
squeegee remains raised.
Button for simultaneous
activation of the scrubbing
unit and vacuuming
function
(Fig.
21/11) After pressing
the button, the most important basic
functions for standard cleaning are
automatically activated/deactivated in
the correct sequence of use: suction
turbine, brush rotation, fresh water
supply and lowering or raising the
brushes and squeegee. When the
vehicle is ready for use in accordance
with requirements, it can be set into
operation simply and quickly by
pressing the button. When the button
has been pressed, the green control
lamp lights up.
Buttons
controlling the
fresh water
supply
(Fig.
21/12) The
fresh water consumption used during
cleaning can be regulated in seven
stages. Accordingly, there are seven
green control lamps on the keypad.
Each lamp relates to one stage. The
maximum quantity which can be used
for cleaning is 2.0
gal/min (all seven
lamps are on). The minimum quantity is
0.3
gal/min (only the left lamp is on).
The last fresh water quantity selected is
always used. When the scrubbing
program is switched on for the first time,
a fresh water quantity of approx.
0.9 gal/min is automatically set.