PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 100 / 120

100
Maintenance and Service
5.7.2 Installing new rubber
deflector strips
Fig. 35
1 Deflectors
2 Rubber deflector strips
3 Clamping rail
4 Clamping rail hooks
5 Wing nuts
The deflector (Fig. 35/1) must
be fixed in its service position
(refer to Section 2.3.1, Point 1).
1. Unscrew the wing nut (Fig. 35/5) at
the end of the deflector.
2. Slide the clamping rail (Fig. 35/3) in
the vehicle's driving direction
(forwards) until the clamping rail
hooks (Fig.
35/4) are freed and the
clamping rail (Fig. 35/3) can be
removed away from the vehicle.
3. Remove the old rubber deflector
strips (Fig. 35/2).
4. Position the new rubber deflector
strips (Fig. 35/2) in place.
5. Mount the clamping rail (Fig. 35/3)
from the outside and slide back by
hand so that the clamping rail hooks
(Fig.
35/4) engage.
Screw the wing nut (Fig. 35/5) on the
thread at the end of the clamping rail
(Fig.
35/3), thus tightening the clamping
rail (Fig. 35/3).
1 2
3
4
5
4