160.478UK User Manual
QTFX-2000LED
HIGH POWER SMART LED FOG MACHINE
Item ref: 160.478UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction:
High output LED fog machine combining large area coverage and powerful delivery with 6 bright LEDs to provide an
interesting and colourful fog display. The unit can be operated by either the control panel and LCD display on the back,
additional RF remote control or 7-Channel DMX, making it ideal for larger sized events. The large capacity fluid tank holds
up to 5.5 litres and is removable for clean and convenient refilling and the integrated low fluid protection switch ensures
the unit can't be damaged if left running when the tank is empty.
Unpacking:
Your QTFX-2000LED should reach you in good condition and should be supplied with IEC mains lead(s), wireless plug-in
receiver/key fob remote, mounting bracket/thumbscrews and user guide. If there are any signs of damage or items
missing from the packaging, contact your dealer immediately.
Warning:
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture. If liquids are spilled on areas
other than inside the fluid tank, disconnect the mains, allow the QTFX-2000LED to dry out and have it checked by
qualified service personnel before further use. Avoid any impact, dropping or extreme pressure to the housing. No user
serviceable parts inside - do not open the case. Allow the QTFX-2000LED to acclimatize to room temperature before
operating. Refer all servicing to qualified service personnel.
Safety:
•
Check for correct mains voltage and condition of the IEC lead before connecting to a power outlet.
•
Check the condition of the remote lead and ensure that it is not trapped.
•
This unit uses a heating element
–
be aware that parts of the housing may be hot whilst in use!
This unit must be earthed.
