PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 64 / 120

64
Operation
Error code Fault Cause Solution
1.2.6.2. Brushes remain stopped
because the anti-blocking
system of the third, middle
brush has been tripped.
Foreign bodies (e.g. tape or
such) block the brushes
• Check the brush for foreign bodies,
remove them as necessary.
1.2.6.3. The brush attachment and
brush motors have been
switched off because the
anti-blocking system has
been tripped.
Foreign bodies between the
brush head and vehicle.
• Check the brush head for foreign bodies
and remove them, as necessary.
1.4.6.1. Squeegee holding
attachment has been
switched off because the
anti-blocking system has
been tripped
• Foreign bodies between the
squeegee and vehicle.
• Squeegee is jammed
• Check the squeegee attachment for
foreign bodies and remove them, as
necessary
• Free the squeegee.
2.2.5.1 Cylindrical brush remains
stopped because the
thermostatic switch has
been tripped.
The motor has overheated.
Foreign bodies (e.g. tape or
such) possibly block the
cylindrical brush.
• Check the cylindrical brush for foreign
bodies and remove them, as necessary.
• Allow the motor to cool down.
• If the problem reoccurs, determine the
cause of overheating; contact an
authorized PowerBoss service center, if
necessary.
2.2.6.1 Cylindrical brush remains
stopped because the anti-
blocking system has been
tripped.
Foreign bodies (e.g. tape or
such) block the cylindrical brush.
Check the cylindrical brush for foreign
bodies and remove them, as necessary.