PowerBoss Admiral 48D, Инструкция по эксплуатации

Страница: 103 / 120

103
Maintenance and Service
5.8.5 Adjusting the support rollers
The squeegee stands with the sealing
strips (Fig.
36/4) and support rollers
(Fig. 36/7) on the ground. To increase
the squeegee contact surface of the
sealing strips (Fig.
36/4) on the floor,
e.g. following wear of the sealing strips
(Fig.
36/4), the support rollers
(Fig. 36/7) must be set higher:
1. Position the squeegee of a level,
solid surface.
2. Loosen the counternuts in each
support roller.
3. Adjust the support rollers (Fig. 36/7)
on the right and left evenly:
- Turn the screw counterclockwise to
raise the support roller.
- Turn the screw clockwise to lower
the support roller.
4. Check the squeegee contact surface
and adjust, if necessary.
5. Tighten the counternuts on each
support roller (Fig. 36/7).