- 30 -
0900_GB-ISOBUS-Terminal_2441
GB
ISOBUS - TERMINAL
Joystick - Configuration
On the joystick there are 8 equal function buttons (1 – 8), a green clearing button (A0) and a level switch (E1/E2/E3). Eight different functions
can be grouped per level (E1/E2/E3) with the buttons = max. 24 various functions can be carried out with the joystick.
Checking the joystick function buttons grouping
From the Start menu commence by pushing T8. With the level switch
(E1/E2/E3) change to the respective overview. The grouped function
buttons
Setting the Joystick
E1
E2
E3
T8
Setting the joystick function buttons grouping
From the Start menu commence by pushing T6 and in the menu “Field-operator 300” press T9 to arrive at the joystick setting menu.
T6
T9
1. Select the function symbol using the joystick key block
2. Select the level on the joystick using the level switch (E1/E2/E3)
3. Press the green clearing button (A0) on the joystick and simultaneously
select the required function button (1 - 8)
4. The following symbols appear on the display:
The “Stop” function is function button 7 at level 1 on the joystick.
Attention:
The numerals on the joystick symbol (1/2/3) show the relevant switch position!
1 Switch up (LED lights up red)
2 Switch centre (LED lights up yellow)
3 Switch down (LED lights up green)
5. Set all other groupings of function buttons following the same procedure
