- 12 -
1100-GB_Anbau_2441
GB
ATTACHING THE MACHINE
Safety
advice:
see Supplement
A1, points1-8.
Hydraulic connections – Variant: Standard
1
2
1
2
3
3
2
2
075-09-17
Hydraulikleitungen beim Traktor anschließen
Connect hydraulic lines to tractor
- Turn p.t.o. off before connecting
- Put lever (ST) on the control unit into the floating position
(0).
- Take care that snap-lock couplers are clean.
- Only connect hydraulic system to the tractor when
stopcock is closed (position A).
Lever position:
Pos.1: Operation with 2 control devices
- The working width for the front rotary units is
simultaneously increased or decreased.
- Pulling on the rope (S) will alter the swath width via
both rear rotary units
Pos. 2: Operation with 3 control devices
- The working width for the front rotary units left and
right is individually increased or decreased
- The working width of the right rotary unit is increased
or decreased using the second control device
Pulling on the rope (S) will alter the swath width via
both rear rotary units
- The working width of the left rotary unit is increased
or decreased using the third control device
Pos. 1
Pos. 2
