- 13 -
1100-GB_Anbau_2441
GB
ATTACHING THE MACHINE
Hydraulic connections – Variant: Power Control / ISOBUS operation
Connect hydraulic lines to tractor
- Turn p.t.o. off before connecting
- Put lever (ST) on the control unit into the floating position
(0).
- Take care that snap-lock couplers are clean.
Single-action control unit
Should the tractor only have a single-action servo-valve,
then it is absolutely necessary to have an oil-return pipe
(T) fitted by a specialist.
- Connect pressure hose (1) to the single-action control
unit. Connect oil-return hose (2) to tractor’s oil-return
pipe
Double-action control unit
- Connect pressure line (1) and oil-return pipe (2).
(Pressure line is any line which goes to the pressure
filter on the machine)
LS Line (Optional extra)
- Connect load sensing line to LS connection on the
tractor.
- the tractor must be turned off for this
Note!
An unpressurized
oil-return must be
guaranteed on the
tractor to prevent
any possible oil
heating
TD 26/92/48
s
h
0
ST
The swather’s hydraulics must be adapted
to the tractor’s hydraulics. Adaptation
is carried out using the screw (7) on the
hydraulic valve block.
Tractor with constant-current pump
= open hydraulic system (standard system)
- Loosen the locking nut
- Unscrew screw (7) about 5 turns
- Retighten
lock
nut
Tractor with constant-pressure pump
= closed hydraulic system
(z.B.: John-Deere, CASE - MAXXUM, CASE - MAGNUM,
FORD SERIE 40 SLE)
- Turn screw (7) completely in
Tractor with load-sensing (LS)
- Turn screw (7) completely in
