- 22 -
0800_GB-Power-Control_2441
GB
POWER CONTROL - OPERATION
The following menu page are displayed by
pressing the “Menu” button on the console.
The TEST menu comes after the CONFIG menu
Sensortest
A black coloured square means:
Sensor / switch delivering signal “1”
Meanings of Indicators:
a
Daily hour counter
b
Daily hectare counter
Clear time meter (h, ha):
- select input field “h” or “ha”
- press
“Menu”
button until the value shown is
“0”.
Meanings of Indicators:
a
Total hour counter
b
Total hectare counter
TEST-menu
a
b
i
c
f
e
g
Meanings of Indicators:
a
Angular sensor left
b
PTO
In the left field the sensor function during p.t.o still
stand is checked.
In the right field the sensor function during turning
p.t.o is checked. This field has a black background
when the p.t.o turns faster than 10 r.p.m
c
Voltage indicator
The top voltage indicator shows the lowest measured
distribution voltage value since work started. This
value is stored until the next new start.
The bottom voltage indicator shows the current
measured distribution voltage value.
d
Sensor – swath width rear
e
Sensor left/right (raking height front)
f
Wheel sensor
g
Sensor left/right (raking height rear)
h
Angular sensor right
i
Sensors for rotor positions
(Transport, off-road transport, working position)
DATA-menu
The following menu page are displayed by
pressing the “Menu” button on the console.
The DATA menu comes after the TEST menu.
a
b
d
e
i
g
a
b
h
i
Note!
Altering the
respective
configuration
takes place with
the plus and
minus buttons
on the console
Note!
Navigating to
input fields takes
place with the
arrow buttons
on the console
Note!
The menu can be
exited at any
time by pressing
the “I/O” button
