- 40 -
1000-GB Wartung_2441
GB
MAINTENANCE
Changing oil
- After the first 50 hours of operation, then after every
500 hours of operation, or annually.
- Remove drain plug (62), drain old oil and dispose of
properly.
Screw drain plug back in again!
- Remove oil filler screw (5) and fill with oil up to the level
screw (1)
Spur gear
Full amount: 1,2 litres: SAE 90
Angular gear
Full amount: 1,6 litres: SAE 85W-90
Gear
Hydraulic unit
Changing the filter
The red tip (50) indicates that the oil filter (F) is soiled. The
distance to which the tip is pushed out dependsd on how
soiled the filter is. When the tip shows maximum soiling,
the filter (F) is to be changed.
- Change hydraulic oil in accordance with tractor‘s
operating manual.
Return flow filter (R)
- Change once a year
Hydraulic oil
- Change once a year
- 100 litres of HLP 46 hydraulic oil per change
F
50
TD57/91/67
OIL
R
LEVEL
min.
371-08-18
Spring tines
- After the first 10 operating hours check the holding
bolts of the spring tines and tighten if necessary
- Check every 100 operating hours thereafter and tighten
if necessary
Torque: 100 Nm
Ensure the spring tines have been fitted properly to
the tine arm!
Take care!
Oil level must
not fall below
minimum mark
(min.)!
