E-56
Projector Options [Setup]
Communication Speed
Set the PC CONTROL data communication speed.
Set according to the communication speed of the con-
nected device.
Select the speed from the “Communication Speed” pull-
down list.
Default Source Select
Set which input signal (input terminal) to set when
the projector is started up.
Select the source from “Default Source Select”.
Last ............ The input signal last projected is projected.
Auto ............ The input signals are automatically detected and
the first input signal found is projected.
Select ......... The selected input signal is projected.
When “Select” is selected, the input signal can be selected.
Select the input signal from the “Select Items” pull-down
list.
Control Panel Key Lock
Use this to lock the operating buttons on the projec-
tor so that they cannot be operated.
Set this at “Control Panel Key Lock”.
Enable ......... The buttons on the projector’s control panel do not
function.
Disable ....... The buttons on the projector’s control panel func-
tion.
Note:
When the projector’s buttons are locked, they can be unlocked
by pressing the CANCEL button on the projector for 10 sec-
onds.
