manualshive.com logo in svg

Plus U2-X2000, Руководство пользователя

Поделиться
Скачать
Plus U2-X2000 Скачать руководство пользователя страница 32

E-32

General Operation

KEYSTONE

FREEZE

HELP

POINTER PC-CARD

MAGNIFY

VOL.

SLIDE

FOLDER LIST

FREEZE

PIC MUTE

VOL.

FOLDER LIST

SLIDE LIST

FREEZE

PIC MUTE

VOL.

FOLDER LIST

SLIDE LIST

Correcting Keystone Distortion of the Projection Screen

When the face of the projector and screen are not parallel (in the vertical orien-
tation), keystone distortion will result. This keystone correction function is used
to compensate for this.

Press the KE- button and adjust so that the left and right sides of the image
become parallel.

Keystone distortion

Correct condition

Keystone correction display

Note

* The keystone distortion correction value can be saved. See "Keystone Save" on Page E-55.
* Keystone correction can be performed over a range of +/- 30˚ with reference to the projection angle.

Note that when displaying a signal of a resolution higher than the number of display pixels of the projector, the correctable range will be
narrower.

* In the absence of a button operation for 3 seconds, the keystone adjustment display will
* The keystone correction display will be closed when there has not been a button operation in 3 seconds. Also note that the keystone

correction display will not appear when the keystone bar has been set to not display.

Freezing a Moving Picture

This function is used to stop a moving picture such as a video image when you
wish to view it carefully.

Press the FREEZE button to provide a still picture, then press it again to return to a
moving picture.

Note

Pressing the FREEZE button projects the picture that is saved in the still picture memory so
that the moving picture continues to advance without interruption.

Cancelling Video and Audio

This function is used to temporarily mute the video and audio.

(The menu display will not disappear.)

A press of the PIC MUTE button causes the picture and audio to disappear.
Another press results in the return of the picture and audio.

Содержание U2-X2000


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды