E-22
Connecting Personal Computers and Video Equipment
RGB
DVI
Cr
Cb
Y
Pr
Pb
Y
Connections with Component Signals
When the Video Connectors are Y, Cb, and Cr Connectors
* Make the connection to the projector's RGB connector using the supplied component cable.
* Switch the input selection of the projector to "RGB".
Usually, the projector identifies RGB and component automatically, but when identification cannot be made, set the RGB signal
to component from the projector's menu with the [Setup]
→
[Page 3]
→
[Signal Select] screens.
When the Video Connectors are Y, Pb, and Pr Connectors
* Make the connection to the projector's RGB connector using the supplied component cable.
* Switch the input selection of the projector to "RGB".
When making connection to a YPbPr output connector (i.e., a high definition video output) such as high definition video, use the
[Color Management]
→
[Color Matrix] screen of the menu to set [Select Color Matrix] to HDTV, and set [Select Color Matrix
Type] to Pb/Pr.
Component cable (Available as an option)
Order code: 28-690
Component cable (Available as an option)
Order code: 28-690
Note:
When connecting a component signal to the DVI connector, connect a component cable via the supplied DVI/mini D-Sub 15-pin conversion
cable. The input selection at this time will be "DVI (ANALOG)", and the signal selection and color matrix settings will be the same as with
analog RGB.
COMPONENT
COMPONENT
Green
Blue
Red
Green
Blue
Red
DVI / Mini D-sub 15-pin conversion
cable (Supplied item)
