Plus U2-X2000 Скачать руководство пользователя страница 31

Страница: 31 / 81

E-31

General Operation

MAGNIFY

KEYSTONE

FREEZE

PIC MUTE

HELP

POINTER PC-CARD

R-CLICK /CANCEL

VOL.

SLIDE

FOLDER LIST

SLIDE LIST

VOL.

FREEZE

PIC MUTE

FOLDER LIST

SLIDE LIST

Enlarging the Image

The target portion can be enlarged and displayed at up to 4 times magnifi-
cation as well as moved.

(1) Press the POINTER button to display the pointer.

(2) Use the SELECT

▲▼

buttons to move the pointer to the location that you

wish to enlarge.

Magnify pointer

(3) Press the M button to enlarge the screen.

The pointer will change to the magnify pointer.

* The SELECT

▲▼

buttons can be used to move the enlarged image. After

the magnify pointer is moved to a corner of the screen, the image will move in
that direction.

(4) Press the MAGNIFY - button to reduce the size of the screen (to the original size).

Note

Pressing the POINTER button results in the mouse function button entering the projector mode.
See "Switching Between Projector Mode and Personal Computer Mode" on Page E-15.

(2)

(1)

(3)
(4)

Adjustment of the Volume

This is the volume adjustment of the projector's built-in speaker.

Pressing the VOL.+ button raises the volume and pressing the VOL.- button
lowers the volume.

Note:

* When the menu is not displayed, the SELECT

▲▼

buttons of the projector can be

used to control the volume.

* The volume display will be closed when there has not been a button operation in 3

seconds. Also note that the volume adjustment display will not appear when the
volume bar has been set to not display.

* The audio of the equipment that is connected to the AUDIO connector will continue

to be output even when the input selection is changed, but the volume adjustment
value will be stored.

Volume Display

Содержание U2-X2000


















































































Результаты поиска

Содержание U2-X2000

Отзывы:

Бренды по названию

Популярные бренды

Plus U2-X2000, Руководство пользователя

Результаты поиска

Содержание U2-X2000

Отзывы:

Бренды по названию

Популярные бренды