E-55
Projector Options [Setup]
Keystone Save
The adjustment value adjusted at “Keystone” is saved. The data
is not lost even when the power is turned off.
Press the ENTER button at “Keystone Save” to set.
When checked .......... The adjustment value is saved.
When not checked .... The adjustment value is not saved.
White Segment
Select whether to stress brightness or colors.
Press the ENTER button at “White Segment” to set.
When checked .......... The picture gets brighter.
When not checked .... The picture has natural colors.
Clear Lamp Hour Meter
Use this to clear the “Remaining Lamp Time” and “Lamp Hour
Meter” settings after replacing the lamp.
Press the ENTER button at “Clear Lamp Hour Meter”. A confirmation
message appears.
Select “OK” and press the ENTER button to clear.
Note:
• When “OK” is selected and the ENTER button is pressed, operating the
“Cancel” button (at setup) is no longer possible.
• The “Remaining Lamp Time” and “Lamp Hour Meter” settings are not
cleared with the “Factory Default” command at “Image Options”.
