manualshive.com logo in svg

Plus U2-X2000, Руководство пользователя

Поделиться
Скачать
Plus U2-X2000 Скачать руководство пользователя страница 18

E-18

Connecting Personal Computers and Video Equipment

RGB

DVI

Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at
conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equip-
ment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home
theater.

Connections with Personal Computers

Please check the following matters before making connections to the personal computer.

*

Suitable resolution for the projector is 1024

768 dots (XGA), and the displayable resolution will differ depending on the

personal computer.
See "Table of Supported Frequency" on Page E-79.

*

When making connections to a Macintosh, change to a displayable resolution at the personal computer side.

*

The setting method of the personal computer will differ depending on the personal computer that you are using. For informa-
tion, read the instruction manual for your personal computer, read the on-line help, or contact the manufacturer of your per-
sonal computer.

Personal Computers with a DVI Connector

*

Make the connection to the DVI connector of the projector using a DVI-D cable (which is commercially available).
When connecting, arrange the connectors in the proper orientation and plug in. Turn the screw knobs and fasten to the
connector of the projector.

*

Switch the input selection of the projector to "DVI (DIGITAL)".

DVI-D cable
(Available as an option. Order code: 28-697)

Monitor output

Personal computer

Note:

This projector uses a 29-pin DVI-I connector that supports the digital interface. Digital signal TMDS (Transition Minimized Differential Signal-
ling) of the DVI (Digital Visual Interface) standard is used.

Содержание U2-X2000


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды