Editing
08
80
En
•
Divide
– Divide a chapter into two or more parts:
Select the chapter you want to divide. From the
following screen use the playback controls (
,
,
,
, etc.) to find the point at which you want to
divide the chapter. With
Divide
highlighted, press
ENTER
.
You can keep dividing the chapter as many times as
you wish (up to 999 chapters per DVD disc or 99
chapters per HDD title). Highlight
Back
and press
ENTER
to return to the Chapter Edit screen.
•
Combine
– Combine two adjacent chapters into one:
Highlight the bar divider between two adjacent
chapters and press
ENTER
(see also the note below)
•
Preview
– Preview chapters: Select the chapter you
want to play; press
STOP
to return to the chapter
edit screen.
•
Undo
– Undo the last command (only works with VR
mode disc edits).
3
Press RETURN to get back to the menu options on
the left side of the screen.
4
To return to the Disc Navigator screen, press
RETURN again, or select ‘Back’ from the menu
options on the left.
Note
• When editing VR mode Original content, it may not
be possible to erase chapters less than five seconds
long.
• It may not always be possible to combine two
chapters, even though they are adjacent. If a chapter
has been divided into three, then the middle chapter
erased, it is not possible to combine the two
remaining chapters into one.
Erase Section (Erase Sec)
Using this command you can delete a part of an Original
title, ideal for cutting out the commercial breaks in a
recording made from the TV.
1
Select ‘Erase Sec’ from the Disc Navigator menu
options.
2
Use the
///
(cursor buttons) to select a
title.
After selecting a title, the Erase Sec screen appears from
which you can mark the start and end points of the
section to erase.
3
Use the playback controls (
,
,
,
, etc.) to
find the start of the section to erase, then (with
‘From’ highlighted) press ENTER.
The bar at the bottom of the screen shows the current
play position in the title. After pressing
ENTER
, a marker
appears under the bar to show the start of the section.
4
In the same way, find the end of the section to
erase, then (with ‘To’ highlighted) press ENTER.
After pressing
ENTER
, another marker appears under the
bar to show the end of the section, with the section itself
marked in red.
5
Select ‘Yes’ to confirm, or ‘No’ to cancel, then
press ENTER.
In the thumbnail viewer you can see a few seconds of
video either side of the marked section to see how the
edit will look.
• When editing VR mode Original content, you may not
be able to erase very short sections (less than five
seconds).
Original
Divide
DVD
Divide Chapter
1-3
0.00.52.17
Play Pause
Divide
Back
Title
Recording Time
LP
Chapter
0h01m24s
0h00m
1
15:00 Wed 13/12 Pr 5
VR mode
HDD
Original
Erase Sec
DVD
Erase Sec
1-1
0.00.52.17
Play Pause
From
To
Back
Title
1
15:00 Wed 13/12 Pr 5
Recording Time
LP
0h01m24s
A
B
Play Pause
0.02.09.17
From
T
A
A
B
PT-RW_UK.book 80 ページ ２００４年７月２６日 月曜日 午後３時４１分
