Other connections
16
122
En
Using this unit with a Pioneer plasma
display
If you have a Pioneer plasma display (models PDP-
505XDE, PDP-505HDE, PDP-435XDE, PDP-435HDE,
PDP-435FDE, PDP-504HDG, PDP-434HDG, PDP-
504HDE, PDP-434HDE), you can use an SR+ cable (see
note below) to connect it to this unit and take advantage
of various convenient features, such as automatic video
input switching of the plasma display when the input is
changed and front panel display messages also
appearing on the plasma display screen.
•
Use a 3-ringed miniplug SR+ cable (not supllied)
to connect the CONTROL IN jack of this unit through
a media receiver to the CONTROL OUT jack of your
plasma display.
Before you can use the extra SR+ features, you need to
make a few settings in the unit.
Switching SR+ control on/off
1
Press SHIFT and SR+.
2
Use the
/
(cursor left/right) buttons to
choose ‘SR+ On?’ or ‘SR+ Off?’.
•
SR+ On
– Switches SR+ on (this unit sends control
signals to the plasma display)
•
SR+ Off
– Switches SR+ off (this unit and the plasma
display work independently)
3
Press ENTER.
The
SR+
indicator lights in the display when SR+ control
is on.
Control mode settings
1
Press SHIFT and SR+.
2
Use the
/
(cursor left/right) buttons to
choose ‘SR+ SetUp?’, then press ENTER.
3
Use the
/
(cursor left/right) buttons to
choose the setting you want to adjust.
The current setting is shown for each option as you cycle
through the display. See below for a full list and
description of each.
CONTROL
ANALOG AUDIO
IN
IN
L
R
OUT
AV 1 (RGB) - TV
USE ONLY WITH S-DVR9 SW
OPTICAL DIGITA
OUT
AV 2 (LINE1/ DECODER)
(AUTO START REC)
OUT
CONTROL
Pioneer plasma display
XV-DVR9H
Media receiver
SR+
ST +
ST –
TUNE +
TUNE –
SHIFT
ENTER
PT-RW_UK.book 122 ページ 2004年7月26日 月曜日 午後3時41分