Getting started
03
24
En
1
Press
STANDBY/ON to switch on.
Also turn on your TV and make sure that it is set to the
correct video input.
2
Press HDD to playback from the HDD, or DVD to
play a DVD.
If playing video from the HDD, skip to step
5
below.
3
Press
OPEN/CLOSE (front panel only) to open
the disc tray.
4
Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you’re loading a double-
sided DVD-Video disc, load it with the side you want to
play face down).
5
Press
PLAY to start playback.
• If you’re playing a DVD-Video or Video CD, a disc
menu may appear when you start playback. Use the
///
(cursor) buttons and
ENTER
to navigate
DVD disc menus, and the number buttons and
ENTER
for Video CD menus.
• When playing video from the HDD, playback will
automatically stop after the end of a title is reached.
• See the following sections for more details on playing
specific kinds of discs.
6
To stop playback, press
STOP.
• You can resume playback of a DVD disc from this
point if you don’t switch the system into standby (you
can switch to the FM/AM radio tuner without losing
the resume point).
• Note that if you switch the input function (to
FM/AM
for example), playback will automatically stop.
7
When you’ve finished using the system, eject the
disc and switch the system back into standby.
• To open/close the disc tray, press
OPEN/CLOSE
on
the front panel. Remove the disc before putting the
system into standby.
• Press
STANDBY/ON
to switch the system into
standby.
STANDBY/ON
TOP MENU
ST +
ST –
TUNE +
TUNE –
RETURN
DVD MENU
HDD
DVD
ENTER
CLEAR
PREV
REV SCAN
PLAY
FWD SCAN
NEXT
STEP/SLOW
PAUSE
STOP
SKIP
CM
BACK
PT-RW_UK.book 24 ページ 2004年7月26日 月曜日 午後3時41分