Recording
06
53
En
3
Press ENTER.
The display shows the timer settings:
Date
Start time
End time
HDD and Recording
channel.
• If
CODE ERROR
appears in the display, check that
the PlusCode programming number is correct and
that the guide channel is set (see
Set VIDEO Plus+
CH
on page 105), then set the timer recording again.
• If
CAN’T SET
appears in the display, it means that
although you entered a valid PlusCode programming
number, the program has already finished.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
Moving the end time by 30-minute blocks
1
During timer recording with the input function
set to HDD/DVD, press and hold
REC for three
seconds.
The timer indicator disappears from the front panel
display.
2
Press
REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
Note that it is only possible to program a new end time for
a timer recording when VPS/PDC is off.
1
With the function set to HDD/DVD, press HOME
MENU and select ‘Timer Recording’ then ‘Timer
Recording (View)’.
2
Use the
(cursor up) button to highlight the
current timer recording (‘Recording’ is shown in the
‘VPS/PDC’ column), then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
3
Set a new Stop time for the timer recording.
Use the
/
(cursor left/right) buttons to select the
hour or minute field, then use the
/
(cursor up/down)
buttons to change the time.
4
Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
ST +
ST –
TUNE +
TUNE –
HOME
MENU
ENTER
REC
NAVI MARK
New Input
Date Start Stop CH Mode Rec to VPS/PDC
5/7 MON
EVERY TUE
7:00
9:00
8:00
10:00
Pr 3
Pr 5
FINE
FINE
HDD
HDD
Recording
On
1/1
Timer Recording
HDD Remain
--h--m(FINE)
DVD Remain
0h43m(FINE)
VPS/PDC
Date Start Stop CH Rec Mode
5/7 MON 7 00 8 00 Pr 3 FINE
OFF
Timer Recording
Program Set
Ttl Name Input
Rec to Group
HDD
GROUP1
PT-RW_UK.book 53 ページ 2004年7月26日 月曜日 午後3時41分