Other connections
16
118
En
Connecting an external decoder box (1)
If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this
page.
Important
• Do not connect your decoder box directly to this system.
• Information from the decoder box (for example, relating to pay TV services), is only viewable when this system is
off (in standby).
• For timer recording to work properly on this system, the VCR/satellite receiver/cable box must also be switched on
during recording.
• It is not possible to watch one TV program and record another using this setup.
• Do not connect this system ‘through’ your VCR, satellite receiver or cable box to your TV.
1
Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR/satellite
receiver/cable box.
2
Use a SCART cable to connect your decoder box
to your VCR/satellite receiver/cable box.
See the manual for your decoder box for more detailed
instructions.
3
Use a SCART cable to connect your VCR/satellite
receiver/cable box to the AV2(LINE 1/DECODER) AV
connector.
4
Use a SCART cable to connect the AV1(RGB)-TV
AV connector to your TV.
VHF/UHF ANTENNA
AM/FM ANTENNA
CONTROL
ANALOG AUDIO
FM UNBAL
75
Ω
AM
LOOP
OUT
IN
IN
IN
L
R
OUT
AV 1 (RGB) - TV
USE ONLY WITH S-DVR727H SW
OPTICAL DIGITAL AUDIO
OUT
AC IN
IN
AV 2 (LINE1/ DECODER)
TV
Antenna/cable TV
wall outlet
VCR/Satellite receiver
/Cable box
Decoder box
SCART AV
CONNECTOR
SCART AV
CONNECTOR
SCART AV
CONNECTOR
ANTENNA
IN
1
4
2
3
PT-RW_UK.book 118 ページ 2004年7月26日 月曜日 午後3時41分