Copying and back-up
07
64
En
•
FINE
,
SP
,
LP
,
EP
,
MN
– The Copy List is copied at the
specified recording quality in real-time. (Note that if
you copy at a higher quality setting than the original,
the copy will not be better quality than the original.)
If you select
MN
above, you can also change the level
setting (
MN1
–
MN32
) from the Recording Quality box
that appears.
•
Optimized
– The recording quality automatically
adjusted so that the Copy List fits on to the space
available on the disc. Copying is carried out in real-
time.
When you change the recording mode setting, you can
see how much disc space it will require. If this is more
than is available, it shows up in red and you won’t be able
to start copying. In this case, either change the recording
quality, or press
RETURN
to go back to the Copy List
screen and erase one or more titles from the Copy List.
3
Select ‘Start’ to begin copying.
Note
• When the copy mode is set to something other than
High-Speed Copy for copying to a Video mode DVD,
the chapter markers of the original are not copied.
Chapter markers are put into the copy at regular
intervals, according to the Auto Chapter setting (see
also
Auto Chapter (Video)
on page 111).
HDD to DVD Copy List menu options
Use the following commands when making an HDD to
DVD Copy List:
•
Add
– Add titles from the HDD to the Copy List (see
page 64).
•
Erase
– Erase individual titles from the Copy List (see
page 65).
•
Title Name
(
Ttl Name
) – Name or rename a title in
the Copy List (see page 65).
•
Divide
– Divide a title in the Copy List into two (see
page 65).
•
Combine
– Combine two adjacent titles in the Copy
List into one (see page 66).
•
Preview
– Check the content of a title in the Copy List
(see page 66).
•
Move
– Change the order of titles in the Copy List
(see page 66).
•
Erase All
– Erase the Copy List (see page 67).
•
Chapter Edit
(
Chpt Edit
) – Edit chapters within a
Copy List title (see page 67):
•
Erase
– Erase a chapter.
•
Divide
– Divide a chapter into two.
•
Combine
– Combine two chapters into one.
•
Move
– Change the chapter order.
•
Preview
– Check the chapter content.
•
Erase Section (Erase Sec)
– Erase a section of a title
in the Copy List (see page 69).
•
Confirm List
(
Conf List
) – Confirm the Copy List and
go to the recording settings screen (see
Recording
the Copy List
below).
Add
Use this command to add titles to the Copy List.
1
Select ‘Add’ from the Copy List menu options.
2
Use the
/
(cursor left/right) buttons to select
a title from the HDD to add to the Copy List, then
press ENTER.
The thumbnail appears in the Copy List section in the
lower half of the screen. If there are already titles in the
Copy List, the title is added at the end.
3
Repeat step 2 to add more titles to the Copy List,
or press RETURN to go back to the Copy List menu
options.
Note
• When Frame Accurate is set to
Off
(see
Frame
Accurate
on page 111), the following limitations on
adding titles to the Copy List apply:
– When adding titles that contain copy-once
protected material, the copy-once parts will not be
added to the Copy List.
– When adding titles that contain material of more
than one aspect ratio (screen size), each part with a
different aspect ratio will be added as a separate title.
– Widescreen material recorded in
LP
,
EP
or
MN1
–
18
will not be added to the Copy List.
– Chapter markers on the copy may be up to 0.5
seconds off compared to the original.
Conf List
HDD
Add
Erase
Ttl Name
Divide
Combine
DVD
DVD
HDD
HDD
1
1/3
1/2
Copy List
All
Total 1h30m
2
3
4
1
2
3
4
HDD to DVD Copy
16:00 Sun 11/8
Recording Time
Pr 5 LP
0h32m55s
PT-RW_UK.book 64 ページ ２００４年７月２６日 月曜日 午後３時４１分
