The Initial Setup menu
15
106
En
Video In / Out settings
Input Colour System
• Default setting:
Auto
On the default setting, the system automatically detects
whether the video signal from the built-in tuner or from
one of the external inputs is PAL, SECAM, 3.58 NTSC or
PAL–60. You may, however, occasionally need to set it
manually if the picture is not displayed properly.
1
Select ‘Input Colour System’, then ‘Next Screen’.
2
Use the C/– buttons or the INPUT
SELECT button to switch between the built-in tuner
and the external inputs.
3
Use the
/
(cursor left/right) buttons to
change the input colour system for the current input
or built-in tuner.
• The available settings depend on the Input Line
System setting (see
Input Line System
on page 102).
The table below shows the different options available.
AV1 Out
• Default setting:
Video
Important
• If you make a setting here that is incompatible with
your TV, the TV may not display any picture at all. If
this happens reset the system (see
Resetting the
system
on page 124 for how to do this).
•
Video
– Compatible with all TVs, but lowest quality of
the three settings.
•
S-Video
– Almost the same quality as RGB, but can
give better results if you are using a long SCART
cable.
•
RGB
– If your TV is compatible, this setting gives the
best picture quality.
Note
• You may have to set up your TV for a specific video
input type. Check the operating instructions for your
TV for more information.
AV2/L1 In
• Default setting:
Video
You only need to make this setting if you connected this
system to another component using the
AV2(LINE 1/
DECODER)
AV connector.
The
AV2(LINE 1/DECODER)
connector input can be set
to one of the following settings. Match the setting to that
output from the connected component.
•
Video
– Sets the input signal type to composite
video.
•
S-Video
– Sets the input signal type to S-video.
• RGB
– Sets the input signal type to RGB video.
Input Line System
Built-in tuner
External input
625 System
Auto
Auto
PAL
PAL
SECAM
SECAM
525 System
n/a
Auto
3.58 NTSC
PAL–60
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Input Colour System
AV1 Out
AV2/L1 In
NTSC on PAL TV
Next Screen
Initial Setup
Auto
Pr 5
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Input Colour System
AV1 Out
AV2/L1 In
NTSC on PAL TV
Video
S-Video
RGB
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Input Colour System
AV1 Out
AV2/L1 In
NTSC on PAL TV
Video
S-Video
RGB
Decoder
Initial Setup
PT-RW_UK.book 106 ページ 2004年7月26日 月曜日 午後3時41分