Pioneer XV-DVR9H Скачать руководство пользователя страница 133

Страница: 133 / 142

Additional information

133

Front panel display error messages

• There is no DV input or the input signal is unre-
cordable.
• Cannot preview because there is no DV input
or the input signal is unrecordable.

No signal was detected at the DV input/output jack. This may
appear if a blank section of DV tape is playing in the connected
camcorder.

• This channel’s TV system is different from the
system’s setting.

The TV system (PAL, NTSC, etc.) of the current channel is different
from the TV system settings of this system.

• Recording failed due to a TV system mismatch.
Press DISPLAY to clear message.

The timer recording failed because the TV system of the channel
set for recording was different from the setting of the system.

• Playback has stopped because the TV system is
different than the recording.

During recording or timer recording standby, the TV System (PAL,
NTSC, etc.) of the playback video changed, causing playback to
stop automatically.

Message

Explanation/Action

Message

Description

Child Lock

• This message appears when the front panel buttons are pressed when the child lock feature is
active. See

Child lock setting

on page 124 for more on switching on/off the child lock.

A. Out Fix

• Blinks rapidly for 2 seconds when an operation is prohibited because the analog out mode is set
to

A. Out Fix

(see

Analog out mode

on page 121).

Phones In

• Blinks rapidly for 2 seconds when an operation is prohibited because headphones are
connected.

96k Stereo

• Blinks rapidly for 2 seconds when an operation is prohibited because the source is digital 88.2 or
96kHz PCM.

Muting

• Blinks rapidly for 2 seconds when an operation is prohibited because the sound is muted (press
the

MUTE

button to turn the sound on).

Exit

• Appears briefly when a menu is automatically exited after a set period of inactivity.

Recording

• Blinks rapidly for 2 seconds when a button is pressed for an operation that can’t be done while
recording.

Can’t use

• Blinks rapidly for 2 seconds when a button is pressed for an operation that can only be done
when the input function is set to HDD/DVD.

Cable Check

• Appears if the subwoofer is not connected to the main system unit, or if the subwoofer is not
switched on.

S.W Error

• Blinks rapidly for 2 seconds if a serious problem with the subwoofer unit is detected. In this case,
unplug the subwoofer unit from the power supply, leave for at least a minute, then plug back in.

PT-RW_UK.book 133 ページ２００４年７月２６日　月曜日　午後３時４１分

Содержание XV-DVR9H















































































































































Результаты поиска

Содержание XV-DVR9H

Отзывы:

Похожие инструкции для XV-DVR9H

Бренды по названию

Популярные бренды

Pioneer XV-DVR9H, Руководство по эксплуатации

Результаты поиска

Содержание XV-DVR9H

Отзывы:

Похожие инструкции для XV-DVR9H

Бренды по названию

Популярные бренды