Other connections
16
121
En
Connecting auxiliary components
This system has both stereo analog inputs and outputs,
as well as a optical digital input. Use these to connect
external components, such as a tape deck, VCR, MD or
CD-R recorder.
•
Connect the ANALOG AUDIO (IN) jacks to the
analog outputs of an external playback component.
These include components such as a VCR or cassette
deck. Connect using RCA pin-plug stereo cables (not
supplied).
•
Connect the ANALOG AUDIO (OUT) jacks to the
analog inputs of an external recording component.
These include components such as a cassette deck,
VCR, MD, or another recorder with analog inputs.
Connect using RCA pin-plug stereo cables (not
supplied).
•
Connect the OPTICAL DIGITAL AUDIO (IN) jack on
the rear panel to the optical digital output of an
external playback component.
These include digital components such as a digital
satellite receiver, MD player or games console. Connect
using a optical digital cable (not supplied).
Tip
• If you’re playing a high signal level source which is
producing unpleasant distortion from the speakers,
you can reduce the signal level of the auxiliary source
(connected to the
ANALOG AUDIO
inputs) by
switching on the attenuator. See
Optional system
settings
on page 124 for how to do this.
• When listening to dual mono Dolby Digital or DTS
material through the optical digital input, you can
use the
AUDIO
button to change the playback
channel (left, right or both).
Analog out mode
The analog out mode allows you to make surround-
compatible recordings from the
ANALOG AUDIO (OUT)
jacks. Dolby multichannel sources will be downmixed to
stereo for improved playback with systems that can
provide matrix-decoding (like Dolby Pro Logic).
1
Press SHIFT and SOUND.
2
Use the
/
(cursor left/right) buttons to select
‘A. Out Mode’, then press ENTER.
3
Use the
/
(cursor up/down) buttons to select
‘A. Out Fix’ or ‘A. Out Norm’.
•
A. Out Fix
– A surround-compatible downmix (left-
total/right-total, or Lt/Rt) of Dolby multichannel
sources is output, (suitable for Dolby Pro Logic or
other matrix decoding).
•
A. Out Norm
– A simple stereo downmix (left-only/
right-only, or Lo/Ro) is output (suitable for playback
on a two-channel stereo system or on headphones).
4
Press ENTER to confirm.
Note
• When analog out mode is set to
A. Out Fix
, most
surround sound-related functions cannot be used.
The display will briefly blink
‘A. Out Fix’
if you try and
use a prohibited function.
• When analog out mode is set to
A. Out Norm
, the
audio from the analog output may be interrupted,
depending on the operation.
• The Analog out mode automatically switches
A. Out
Norm
if you change the input function (
HDD/DVD
,
FM/AM
, etc.) or switch the power off.
UHF ANTENNA
AM/FM ANTENNA
CONTROL
ANALOG AUDIO
FM UNBAL
75
Ω
AM
LOOP
IN
IN
IN
L
R
OUT
USE ON
AV 2 (INPUT1/ DECODER)
AUDIO
INPUT
AUDIO
OUTPUT
Tape deck, etc.
XV-DVR9H
IN
PT-RW_UK.book 121 ページ ２００４年７月２６日 月曜日 午後３時４１分
