9
PRECAUTIONS FOR SAFE OPERATION
This unit must be plugged into a dedicated circuit protected by branch circuit breaker.
Use a dedicated power source as indicated on the rating label attached to the unit. A multiple-tap may
cause fire resulting from abnormal heating.
Never store corrosive substances such as acid or alkali
in this unit if the container cannot be
sealed. These may cause corrosion of inner components or electric parts.
Check the setting when starting up of operation after power failure or turning off of power
switch.
The stored items may be damaged due to the change of setting.
Be careful not to tip over the unit
during movement to prevent damage or injury.
Prepare a safety check sheet
(copy the last page) when you request any repair or maintenance for
the safety of service personnel.
Do not climb on top of the incubator or place any object on it.
By doing so you may damage the
incubator or knock it over, which may result in injury.
Wear rubber gloves when performing maintenance on the chamber.
Failure to wear gloves may
result in cuts or abrasions from sharp edges or corners.
Do not damage the glass or give it a shock.
The Inner door in the CO
2
Incubator are tempered glass,
but they can be broken or cause injury if they are used incorrectly.
To ensure the safety of the service engineer, submit a safety check sheet with the required
items filled out.
This is provided as the photocopiable “Safety Check Sheet” at the end of these
operating instructions
CAUTION
