manualshive.com logo in svg

Phcbi MCO-170AC, Руководство по эксплуатации

Поделиться
Скачать
Phcbi MCO-170AC Скачать руководство пользователя страница 55

 

55 

UV LAMP (OPTION)

 

 

The  UV  lamp  operates  when  the  optional  UV  System  MCO-170UVS  is  installed  on  the  model 
MCO-170AC. 
Operation of the UV lamp disinfects the water in the humidifying pan and the air circulating in the chamber. 
 

    Using UV lamp 

 
1. Correctly install all of the inner attachments, and place the cultivation samples on the trays. 

Note:   

· The humidifying pan and humidifying pan cover prevent UV light from leaking. Always use them even 
when not humidifying. 
· Never turn ON the UV lamp when the humidifying pan cover is removed. 
· Always use the humidifying pan cover even when using the incubator without turning ON the UV lamp. 
Using without humidifying pan cover may have a bad influence on the chamber temperature distribution 
and humidity recovery. 
 

2.

 Close the outer door. The UV lamp will light for the preset period (i.e. the time set on “UV Timer” plus the 

time added by “UV Timer Ext”). Refer to page 58 for instructions on setting the timer. 

Notes:   

• If the outer door is opened while the UV lamp is lit, the lamp will turn OFF. When the door is closed again, 
the lamp will light for the preset period. 
• Repeated opening and closing of the outer door may adversely affect the condensation in the chamber and 
the  chamber  temperature  distribution  because  the  UV  lamp  generates  heat  for  a  long  time.  It  may  also 
shorten the service life of the UV lamp. 
• UV light is harmful to the eyes. Do not turn the UV lamp ON when the inner door is open.

 

 

3.

 If the outer door is not opened for at least 12 consecutive hours, the UV lamp lights for the preset period 

every 12 hours. 

Note:

 Opening the outer door will reset the 12-hour period. 

 

  The  recommended  replacement  time  for  the  UV  lamp  (i.e.,  when  the  UV  output  ratio  drops  to 

60  %–70  %  of  its  initial  value)  is  when  the  accumulated  ON  time  reaches  5,000  hours.  The  message 
“Warning: UV Bulb Life” then appears in the message display field. Replace the UV lamp promptly at this 
point. Contact our sales representative or agent for information. 
 

 If the UV lamp burns out, “Err18: UV Lamp Abnormal” is displayed in the message display field. Replace 

the UV lamp, and replace the glow starter (type FG-7P or FG-7PL) at the same time. Contact our sales 
representative or agent for information. 
 
 
 
 
 
 
 
 
 

Содержание MCO-170AC

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды