manualshive.com logo in svg

PerkinElmer aanalyst 200, Руководство пользователя

Поделиться
Скачать
PerkinElmer aanalyst 200 Скачать руководство пользователя страница 31

AAnalyst 200 User’s Guide  

                                                                                                                                                    2-13 

Electrical Safety  

The instrument has been designed to protect the operator from potential electrical hazards. This 
section describes some recommended electrical safety practices.  

 

WARNING 

Lethal voltages are present at certain areas within the instrument. Internal 
maintenance of the instrument should only be performed by a PerkinElmer 
service engineer or similarly authorized and trained person. When the 
instrument is connected to line power, opening the instrument covers is likely 
to expose live parts. Even when the power switch is off, high voltages can still 
be present. Capacitors inside the instrument may still be charged even if the 
instrument has been disconnected from all voltage sources. 

The instrument must be correctly connected to a suitable electrical supply. The supply must have 
a correctly installed protective conductor (earth ground) and must be installed and checked by a 
qualified electrician before connecting the instrument.  

 

WARNING 

Any interruption of the protective conductor (earth ground) inside or outside 
the instrument or disconnection of the protective conductor terminal is likely 
to make the instrument dangerous. Intentional interruption is prohibited. 

When working with the instrument: 

•

 

Connect the instrument to a correctly installed line power outlet that has a protective 
conductor connection (earth ground).  

•

 

Do not operate the instrument with any covers or internal parts removed.  

•

 

Do not attempt to make internal adjustments or replacements except as directed in the 
manuals.  

•

 

Disconnect the instrument from all voltage sources before opening it for any 
adjustment, replacement, maintenance, or repair. If afterwards, the opened instrument 
must be operated for further adjustment, maintenance, or repair, this must only be done 
by a PerkinElmer Service engineer or similarly authorized and trained person.  

•

 

Whenever it is possible that the instrument is no longer electrically safe for use, make 
the instrument inoperative and secure it against any unauthorized or unintentional 
operation. The electrical safety of the instrument is likely to be impaired if, for exam-
ple, the instrument shows visible damage, has been subjected to prolonged storage 
under unfavorable conditions or has been subjected to severe stress during 
transportation.  

Содержание aanalyst 200









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды