Pego NECTOR, Руководство по эксплуатации и обслуживанию

Страница: 4 / 64

NECTOR
Page 4
OPERATION AND MAINTENANCE MANUAL
Rev. 03-21
INTRODUCTION
Page 6 1.1 General information
Page 8 1.2 Product identification codes
Page 8 1.3 Overall dimensions
Page 8 1.4 Product identification data
INSTALLATION
Page 9 2.1 Warnings for the installer
Page 9 2.2 Pack contents
Page 10 2.3 Panel installation
FUNCTIONALITY
Page 12 3.1 Functions managed by NECTOR
TECHNICAL SPECIFICATIONS
Page 14 4.1 Technical specifications
Page 15 4.2 Warranty conditions
DATA PROGRAMMING
Page 16 5.1 Display description
Page 17 5.2 Front keyboard
Page 18 5.3 Key combinations
Page 19 5.4 General information
Page 19 5.5 Symbols
Page 19 5.6 Set point set-up and display
Page 20 5.7 First level programming (user level)
Page 20 5.8 First level variable list
Page 22 5.9 Second level programming (installer level)
Page 22 5.10 List of second-level variables
Page 25 5.11 Third level programming (system configurations)
Page 25 5.12 List of third level variables
Page 28 5.13 Probe display (read-only)
Page 28 5.14 List of probe display variables
Page 29 5.15 Data logging
Page 29 5.16 Saving data to USB
Page 33 5.17 Software update
Page 33 5.18 Parameter export/Import
Page 33 5.19 Turning on the controller
Page 33 5.20 Operating mode
Page 34 5.21 Evaporator configuration
Page 34 5.22 Manual defrost activation/deactivation
Page 34 5.23 Hot gas defrosting
Page 35 5.24 Resistor thermostat defrosting
Page 35 5.25 Display of ambient temperature during defrosting
Page 35 5.26 Changing of date and time settings
Page 35 5.27 Pump down function
Page 36 5.28 Password protection
Page 36 5.29 Day/night function
Page 36 5.30 Emergency function in case of faulty ambient probe (E0)
Page 37 5.31 Fan speed management
– 0-10V output
Page 39 5.32 Cell microdoor management
Page 39 5.33 Humidification management
TABLE OF CONTENTS
5
1
2
3
4