Pego NECTOR, Руководство по эксплуатации и обслуживанию

Страница: 40 / 64

NECTOR
Page 40
OPERATION AND MAINTENANCE MANUAL
Rev. 03-21
CONNECTION CONFIGURATION
The NECTOR controller is equipped with Bluetooth BLE,
Wi-Fi
or Ethernet connectivity for
management or monitoring via remote devices (tablets, smartphones, PCs).
In particular, remote management of the device takes place in the following ways:
Distance Support Channel Mode
MyPego app
(BLE)
approx. 50m Smartphone, Tablet Bluetooth BLE Control and monitoring
MyPego app
(Cloud)
--- Smartphone, Tablet Wi-Fi, Ethernet
Real-time monitoring and
notifications
Integrated
webserver
--- Smartphone, Tablet, PC Wi-Fi, Ethernet
Control and monitoring;
network configuration
required
The myPego app is available on Google and Apple stores for free. It allows complete control
of the NECTOR tool and is necessary to perform the basic operations to connect the device to the
Internet (check IP address, enter Wi-Fiusername and password, etc.
Through the same application it is possible to receive notifications from NECTOR tools in the event
of an alarm and to monitor the status of registered devices (subscription function, see dedicated
chapter).
To connect the NECTOR tool to the internet via wi-fi or Ethernet, proceed as follows:
1)
Download the myPego app from the Google/Apple store and install it on a smartphone/tablet.
2)
Activate Bluetooth on the NECTOR tool by pressing the keys simultaneously and
for 5 seconds. The flashing icon is activated.
3)
Open the myPego app and access the Bluetooth
section.
4)
Touch the "Scan” key and the "Confirm” key to make the connection. The Bluetooth icon
on the instrument turns on steady to signal the connection.
MONITORING
6.1