PCAN-Router Pro FD – User Manual
44
with the number “1”. The resulting values for the individual fields
are: 0, 128, 192, 224, 240, 248, 252, 254, and 255.
While entering values from left to right, as soon as a value smaller
than “255” is entered, a “0” must follow. For example,
255.255.128.0 is valid, while 255.128.255.0 is false.
7.3.3
Gateway Address
This setting is used to set the IP address (IPv4) of the gateway that
manages the IP network. It must be specified if the IP address was
set manually.
ETH_GW=192.168.1.1
The same guidelines apply for setting the gateway address as for
the IP address, see chapter 7.3.1 on page 42.
7.3.4
Output the IP address via CAN
If DHCP is used for specifying the IP address, the dynamically
assigned address can hardly be predicted.
With the following setting it is possible to define a CAN message
transmitting the IP address on data byte 0 to 3. The message is
transmitted once on CAN channel 1 after the device is powered.
ETH_CAN=12345ABC
Option
Description
No value. The feature is disabled.
0 to 1FFFFFFF
The CAN message is defined with an Extended 29-bit CAN ID in
hexadecimal format.