PCAN-Router Pro FD – User Manual
26
Do the following to start the bootloader with the
Log Off Card
button:
Figure 12:
Log Off Card
button on the bottom left of the front
1.
Disconnect the power supply.
2.
Press and hold the
Log Off Card
button and restore the
power supply.
3.
Keep the button pressed for about 5 seconds.
The bootloader is activated. The CAN, status, and memory
card LEDs are flashing orange alternately.
4.
Connect the CAN interface of your computer to a CAN
connector on the PCAN-Router Pro FD.
Note:
The firmware upload is possible with each of the 6 CAN
channels. The selected CAN channel must be connected alone
to the PC.
